如何快速找到我們？（誠信經營ALCOA鋁材代理經銷商）

相關產品：

• 7075鋁板_7075航空鋁板_進口航空鋁

• 沈陽7075鋁板-沈陽7075鋁材-沈陽7

• 遼寧7075鋁板-遼寧7075鋁材-遼寧7

• 南京7075鋁板-南京7075鋁材-南京7

• 7075鋁合金板-進口鋁合金7075

• AA7075鋁板價格-AA7075鋁材價格-AA7

• 7075-T651_美鋁7075T7651_ALLOY7075T7651

• 美鋁7075_美鋁7075T651價格-美鋁707

• 航空鋁7075-航空鋁A7075-航空鋁AL7

• 象山7075鋁板-象山7075鋁材-象山7

• 臺州7075鋁板-臺州7075鋁材-臺州7

• 海寧7075鋁板-海寧7075鋁材-海寧7

• 北京7075鋁板-北京7075鋁材-北京7

• 福建7075鋁板-福建7075鋁材-福建7

• 江西7075鋁板-江西7075鋁材-江西7

• 陜西7075鋁板-陜西7075鋁材-陜西7

• 浙江7075鋁板-浙江7075鋁材-浙江7

• 山東7075鋁板-山東7075鋁材-山東7

• 太倉7075鋁板-太倉7075T651鋁材-太倉

• 上海浦東7075鋁板-上海浦東7075鋁材
  

ALLOY 7075進口美國鋁棒（實物實圖拍照，盜用必究）

航空鋁7075熱處理及物理性能

Introduced by Alcoa in 1943, alloy 7075 has been the standard workhorse 7XXX series alloy within the aerospace industry ever since.

It was the first successful Al-Zn-Mg-Cu high strength alloy using the beneficial effects of the alloying addition of chromium to develop

good stress-corrosion cracking resistance in sheet products. Although other 7XXX alloys have since been developed with improved

specificproperties, alloy 7075 remains the baseline with a good balance of properties required for aerospace applications.

Alloy 7075 is available in bare and alclad sheet and plate product forms in the annealed state as well as several tempers

of the T6, T73 and T76 types.

Alloy 7075 sheet and plate products have application throughout aircraft and aerospace structures where a combination of high strength with moderate toughness

and corrosion resistance are required.

Typical applications are alclad skin sheet, structural plate components up to 4 inches in thickness and general aluminum

aerospace applications.

Note: Value maximum if range not shown.

MECHANICAL PROPERTIES

ALCLAD 7075

Two side cladding. Nominal cladding thickness is 4% on gauges under 0.062 in. (1.57 mm); 2.5% on gauges over 0.062 in. (1.57 mm). Property

values for one side clad material are similar (not shown). All values are minimum long transverse mechanical properties except where noted.